ortho-Phosphoric acid 85%

ProductType:Chemicals
Product Category:Laboratory chemicals
Product Sub Category:Merck Millipore
Call to buy
ArioExir
AboutProduct

Catalogue Number 100573
Synonyms o-Phosphoric acid, Orthophosphoric acid

Product Information
CAS number 7664-38-2
Grade ACS,ISO,Reag. Ph Eur
HS Code 2809 20 00
Quality Level MQ300

Physicochemical Information
Boiling point 158 °C (1013 mbar)
Density 1.71 g/cm3 (20 °C)
Melting Point 21 °C
pH value <0.5 (100 g/l, H₂O, 20 °C)
Vapor pressure 2 hPa (20 °C)
Viscosity kinematic 30.5 mm2/s (20 °C)

Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Pictogram(s)
Hazard Statement(s) H290: May be corrosive to metals.
H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s) P234: Keep only in original packaging.
P270: Do not eat, drink or smoke when using this product.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
P301 + P312: IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word Danger
Storage class 8B Non-combustible, corrosive hazardous materials
WGK WGK 1 slightly hazardous to water
Disposal 12
Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Categories of danger corrosive

Storage and Shipping Information
Storage NoTempLimit

color:
color: