ArioExir

009821-66000359

 ArioExir
Sulfuric acid 90-91%

Sulfuric acid 90-91%

ProductType:Chemicals
Product Category:Laboratory chemicals
Product Sub Category:Merck Millipore
ArioExir
Call to buy
ArioExir
AboutProduct

Description
Catalogue Number 100729

Product Information
HS Code 2807 00 00
Quality Level MQ300

Physicochemical Information
Boiling point 300 °C
Density 1.81 g/cm3 (20 °C)

Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Statement(s) H290: May be corrosive to metals.
H314: Causes severe skin burns and eye damage.
Precautionary Statement(s) P234: Keep only in original packaging.
P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection.
P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water.
P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word Danger
Storage class 8B Non-combustible, corrosive hazardous materials
WGK WGK 1 slightly hazardous to water
Disposal 12
Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Categories of danger corrosive

Storage and Shipping Information
Storage NoTempLimit

color:
color: