Nitric acid 69%

009821-66000359

Nitric acid 69%

Nitric acid 69%

ProductType:Chemicals

Product Category:Laboratory chemicals

Product Sub Category:Merck Millipore

Call to buy

ArioExir

AboutProduct

Catalogue Number

101799

Product Information
Grade	ACS,Reag. Ph Eur
HS Code	2808 00 00
Quality Level	MQ300

Physicochemical Information
Boiling point	122 °C (1013 hPa)
Density	1.41 g/cm3 (20 °C)
Melting Point	-41 °C
pH value	<1 (H₂O, 20 °C)
Vapor pressure	9.4 hPa (20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H272: May intensify fire; oxidizer. H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H331: Toxic if inhaled. EUH071: Corrosive to the respiratory tract.
Precautionary Statement(s)	P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P220: Keep away from clothing and other combustible materials. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word	Danger
RTECS	QU5775000
Storage class	5.1B Oxidizing hazardous materials
WGK	WGK 3 highly hazardous to water
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Categories of danger	corrosive

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

color:

color: