Hydrochloric acid fuming 37%

009821-66000359

Hydrochloric acid fuming 37%

Hydrochloric acid fuming 37%

ProductType:Chemicals

Product Category:Laboratory chemicals

Product Sub Category:Merck Millipore

Call to buy

ArioExir

AboutProduct

Description
Catalogue Number	100317
Synonyms	Hydrogen chloride solution

Product Information
Grade	ACS,ISO,Reag. Ph Eur
HS Code	2806 10 00
Quality Level	MQ300

Physicochemical Information
Density	1.19 g/cm3 (20 °C)
pH value	<1 (H₂O, 20 °C)
Vapor pressure	190 hPa (20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation.
Precautionary Statement(s)	P234: Keep only in original packaging. P261: Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word	Danger
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	WGK 1 slightly hazardous to water
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Categories of danger	corrosive

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

color:

color: